Dell Vostro V130 (Late 2010) - Manual (Page 56)

NOTE: To replace the display panel, see Installing The Display Panel .
Installing The Display Panel
NOTE: To remove or locate the display panel, see Removing The Display Panel .
1. Connect the display cable to the display cover and use the adhesive tape to secure the display cable to the display
panel.
2. Place the display panel on the display back cover.
3. Replace and tighten the screws that secure the display panel to the display back cover.
4. Install the display hinges .
5. Remove the display bezel .
6. Install the palmrest and display assembly .
7. Install the system board .
8. Install the thermal fan .
9. Install the keyboard .
10. Install the memory .
11. Install the LED cover .
12. Install the wireless local area network (WLAN) card .
13. Install the wireless wide area network (WWAN) card .
14. Install the battery .
15. Install the base cover .
16. Install the Secure Digital (SD) card .
17. Follow the procedures in After Working Inside Your Computer .
56