Dell Vostro V130 (Late 2010) - Manual (Page 51)

Card-Reader Board
Removing The Card-Reader Board
1. Follow the procedures in Before Working on Your Computer .
2. Remove the Secure Digital (SD) card .
3. Remove the base cover .
4. Remove the battery .
5. Remove the audio and hard drive assembly .
6. Disconnect the card-reader cable from the system board.
7. Remove the screws that secure the card-reader board to the computer.
8. Lift the card-reader board and remove it from the computer.
NOTE: To replace the card-reader board, see Installing The Card-Reader Board .
51