Dell Vostro V130 (Late 2010) - Manual (Page 21)

Palmrest and Display Assembly
Removing The Palmrest and Display Assembly
1. Follow the procedures in Before Working On Your Computer .
2. Remove the Secure Digital (SD) card .
3. Remove the base cover .
4. Remove the battery .
5. Remove the audio board and hard drive .
6. Remove the wireless local area network (WLAN) card .
7. Remove the wireless wide area network(WWAN) card .
8. Remove the LED cover .
9. Remove the memory .
10. Remove the keyboard .
11. Remove the card reader .
12. Remove the coin-cell battery .
13. Remove the thermal fan .
14. Remove the system board .
15. Remove the cloth tapes to release the antenna cables from the computer.
16. Release the antenna, camera and display cables from the computer.
17. Remove the screws to release the display assembly from the palmrest.
21