Dell Studio 1749 (Early 2010) User Manual
Page 13
1.
Follow the procedures in
Before You Begin
.
2.
Align the screw holes on the camera module with the screw holes on the display cover.
3.
Replace the two screws that secure the camera module to the display cover.
4.
Replace the display panel (see
Replacing the Display Panel
).
5.
Replace the display assembly (see
Replacing the Display Assembly
).
6.
Replace the media controls board (see
Replacing the Media Controls Board
).
7.
Replace the keyboard (see
Replacing the Keyboard
).
8.
Replace the center control cover (see
Replacing the Center Control Cover
).
9.
Connect the subwoofer assembly cable to the subwoofer assembly cable connector on the system board (see
Replacing the Palm Rest
).
10.
Connect the antenna cables to the Mini-Card(s) (see
Replacing the Mini-Card
).
11.
Replace the base cover (see
Replacing the Base Cover
).
12.
Replace the battery (see
Replacing the Battery
).
Back to Contents Page