Graphic processor heat sink, Removing the graphic processor heat sink, Replacing the graphic processor heat sink – Dell Studio 1749 (Early 2010) User Manual
Page 22
4.
Follow the instructions from
step 5
to
step 21
in
Replacing the System Board
.
5.
Replace the battery (see
Replacing the Battery
).
Graphic Processor Heat Sink
Removing the Graphic Processor Heat Sink
1.
Follow the instructions in
Before You Begin
.
2.
Remove the battery (see
Removing the Battery
).
3.
Follow the instructions from
step 2
to
step 20
in
Removing the System Board
.
4.
In sequential order (indicated on the processor heat sink), loosen the four captive screws that secure the processor heat sink to the system board.
5.
Lift the graphic processor heat sink off the system board.
Replacing the Graphic Processor Heat Sink
1.
Follow the procedures in
Before You Begin
.
2.
Place the graphic processor heat sink on the system board.
3.
Align the four captive screws on the graphic processor heat sink with the screw holes on the system board and tighten the screws in sequential order
(indicated on the processor heat sink).
4.
Follow the instructions from
step 5
to
step 21
in
Replacing the System Board
.
5.
Replace the battery (see
Replacing the Battery
).
Back to Contents Page
1
screws (4)
2
graphic processor heat sink
NOTE:
This procedure assumes that you have already removed the graphic processor heat sink and are ready to replace it.