Dell Studio 1749 (Early 2010) - Manual (Page 2)

Back to Contents Page
AC Adapter Connector
Dell Studio™ 1745/1747 Service Manual
Removing the AC Adapter Connector
Replacing the AC Adapter Connector
Removing the AC Adapter Connector
1. Follow the procedures in Before You Begin .
2. Remove the subwoofer assembly (see Removing the Subwoofer Assembly ).
3. Make a note of the AC adapter connector cable routing and lift the AC adapter connector out of the computer base.
Replacing the AC Adapter Connector
1. Follow the procedures in Before You Begin .
2. Route the AC adapter connector cable and place the AC adapter connector on the computer base.
3. Replace the subwoofer assembly (see Replacing the Subwoofer Assembly ).
Back to Contents Page
WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION: Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™
is not covered by your warranty.
CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
surface (such as a connector on your computer).
CAUTION: To help prevent damage to the system board, remove the main battery (see Removing the Battery ) before working inside the
computer.
1 AC adapter connector 2 AC adapter connector cable