Replacing the keyboard – Dell Studio 1749 (Early 2010) User Manual
Page 34
Advertising
Replacing the Keyboard
1.
Follow the procedures in
Before You Begin
.
2.
Slide the keyboard cable into the connector on the system board. Press down on the connector latch to secure the cable to the system board connector.
3.
Slide the backlit keyboard cable into the connector on the system board. Press down on the connector latch to secure the cable to the system board
connector.
4.
Align the six tabs on the keyboard with the slots on the palm rest.
5.
Place the keyboard on the palm rest.
6.
Replace the four screws that secure the keyboard to the palm rest.
7.
Replace the center control cover (see
Replacing the Center Control Cover
).
8.
Replace the battery (see
Replacing the Battery
).
Back to Contents Page
Advertising