Replacing the usb board – Dell Studio 1749 (Early 2010) User Manual
Page 61
Replacing the USB Board
1.
Follow the procedures in
Before You Begin
.
2.
Align the hole on the USB board with the protrusion on the computer base.
3.
Replace the screw that secures the USB board to the computer base.
4.
Route the USB board cable and press down on the latch to connect the USB board cable to the USB board cable connector on the system board.
5.
Replace the optical drive (see
Replacing the Optical Drive
).
6.
Replace the media card reader board (see
Replacing the Media Card Reader Board
).
7.
Replace the palm rest (see
Replacing the Palm Rest
).
8.
Replace the media controls board (see
Replacing the Media Controls Board
).
9.
Replace the keyboard (see
Replacing the Keyboard
).
10.
Replace the center control cover (see
Replacing the Center Control Cover
).
11.
Replace the battery (see
Replacing the Battery
).
Back to Contents Page