Dell Powervault NX400 - Manual (Page 116)

Error Code Message Information
PSU0034
Message An under voltage fault detected on power supply < number >.
LCD Message An under voltage fault detected on PSU < number >. Check power
source.
Details This failure may be the result of an electrical issue with cables or
subsystem components in the system.
Action
1. Remove and reinstall the power supply.
2. Check cables and subsystem components in the system for
damage.
3. If the issue persists, see Getting Help .
PSU0035
Message An over voltage fault detected on power supply < number >.
LCD Message Over voltage fault on PSU < number >. Check PSU.
Action Check input power or reinstall the power supply. If the issue persists,
see
Getting Help .
PSU0036
Message An over current fault detected on power supply < number >.
LCD Message An over current fault detected on PSU < number >. Check PSU.
Details This failure may be the result of an electrical issue with cables or
subsystem components in the system.
Action
1. Remove and reinstall the power supply.
2. Check cables and subsystem components in the system for
damage.
3. If the issue persists, see Getting Help .
PSU0037
Message Fan failure detected on power supply < number >.
LCD Message Fan failure detected on PSU < number >. Check PSU.
Action Check for fan blockage. If the problem persists, see Getting Help .
PSU0076
Message A power supply wattage mismatch is detected; power supply
<
number > is rated for < value > watts.
LCD Message PSU wattage mismatch; PSU < number > = < value >watts
Details Power supplies should be of the same input type and power rating.
Action Install matched power supplies and review this manual for proper
configuration.
116