Dell Powervault NX400 - Manual (Page 75)

Control Panel Assembly
Removing The Control Panel
CAUTION: Many repairs may only be done by a certified service technician. You should only perform
troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or
telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your
warranty. Read and follow the safety instructions that came with the product.
1. If installed, remove the front bezel.
2. Turn off the system, including any attached peripherals, and disconnect the system from the electrical outlet and
peripherals.
3. Open the system.
CAUTION: Do not use excessive force when removing the control panel as it can damage the connectors.
4. Release the locking tabs of the control panel by angling the control panel up and away from the system.
Figure 38. Removing and Installing the Control Panel
1. notches (6)
2. locking tabs (6)
3. control panel
75