Dell Powervault NX400 User Manual
Page 83
Advertising
6.
Reconnect all cables to the system board.
NOTE: Ensure that the cables inside the system are routed through the cable routing latch.
7.
Close the system.
8.
If applicable, install the front bezel.
9.
Reconnect the system to its electrical outlet and turn the system on, including any attached peripherals.
10. Import your new or existing iDRAC Enterprise license. For more information, see the
iDRAC7 User's Guide
under
Software → Systems Management → Dell Remote Access Controllers,at support.dell.com/manuals.
83
Advertising