Installing the microprocessor airflow shroud – Dell XPS/Dimension XPS User Manual
Page 106
106
Removing and Installing Parts
www
.dell.com | support.dell.com
Installing the Microprocessor Airflow Shroud
1
Follow the instructions in "Before You Begin" on page 80.
2
Open the computer cover (see page 82).
3
Insert the bottom anchor tabs into the anchor slots.
4
Align and insert the side anchor tabs into the anchor slots.
5
Press the indentations until the top anchor tabs on the shroud snap securely into
place.
6
Close the computer cover (see page 117).
NOTICE: To connect a network cable, first plug the cable into the network wall jack and then
plug it into the computer.
7
Connect your computer and devices to electrical outlets, and turn them on.
top anchor tabs (2)
bottom anchor tabs (2)
side anchor tabs (2)
airflow shroud
indentations
G0550bk1.book Page 106 Thursday, July 10, 2003 1:55 PM