Dell XPS/Dimension XPS - Manual (Page 99)

Removing and Installing Parts 99
7 Connect the power and hard-drive cables to the drive.
8 Check all connectors to be certain that they are properly cabled and firmly seated.
9 Close the computer cover (see page 82).
NOTICE: To connect a network cable, first plug the cable into the network wall jack and then
plug it into the computer.
10 Connect your computer and devices to electrical outlets, and turn them on.
See the documentation that came with the drive for instructions on installing any
software required for drive operation.
tabs (2)
IDE hard-
drive cable
power cable
IDE hard
drive
IDE hard drive example serial ATA hard drive example
serial ATA
hard drive
serial ATA hard-
drive cable
power cable
tabs (2)
system board
connector
system board
connector
G0550bk1.book Page 99 Thursday, July 10, 2003 1:55 PM