Dell M5200 Medium Workgroup Mono Laser Printer - Manual (Page 106)

Purpose:
To configure an internal print server.
Values:
Values for this menu item are supplied by the specific print server. Select the menu item to see the available
values.
Refer to the documentation on the Drivers and Utilities CD for more information.
USB Menu
Use the USB Menu to change printer settings affecting a Universal Serial Bus (USB) port (USB Option <x>).
Select a menu item for more details:
NPA Mode PS SmartSwitch
PCL SmartSwitch USB Buffer
MAC Binary PS
NOTE: Values marked by an asterisk (*) are the factory default settings.
PCL SmartSwitch
Purpose:
To configure the printer so it automatically switches to PCL emulation when a print job received through the
USB port requires it, regardless of the default printer language.
Values:
On* Printer examines the data on the USB interface and selects PCL emulation if the data indicates that is
the required printer language.
Off Printer does not examine the incoming data. The printer uses PostScript emulation to process the job
if PS SmartSwitch is On, or uses the default printer language specified in the Setup Menu if PS
SmartSwitch is Off.
See also: