Between the envelope feeder and the printer – Dell M5200 Medium Workgroup Mono Laser Printer User Manual

Page 179

Advertising
background image

4.

Replace the stack of envelopes in the envelope feeder.

5.

Adjust the envelope edge guide.

6.

Lower the envelope weight to the stack.

7.

NOTE:

If envelope jams continue to occur, repeat these steps and feed a single envelope between

steps 4 and 5. This may correct the problem.

Between the envelope feeder and the printer

Lift the envelope weight.

1.

Flip the envelope weight back toward the printer.

2.

Remove the stack of envelopes from the envelope feeder.

3.

Push the envelope support to the closed position.

4.

Open the printer upper front door.

5.

Pull the envelope feeder up slightly and straight out of the printer. Set it aside.

6.

Advertising