Dell M5200 Medium Workgroup Mono Laser Printer User Manual

Page 133

Advertising

cancel the current job.
To avoid this error in the future:

Delete fonts, macros, and other
data stored in printer memory.
Install more printer memory.

The messages 37 Insufficient
Memory

and Held Jobs may be lost

alternate on the display.

See also:

Loading print media in standard and

optional trays

Install <device>
or Cancel Job

The printer is requesting that a
specified device be installed so it
can print a job.

<device> is one of the following:

Tray x
Duplex
Env Feeder

Turn the printer off, install the specified
device, and restart the printer.
Press Menu to open the Job Menu and
cancel the current job.

Invalid Network
<x> Code

The code in an internal print server
is not valid. The printer cannot
receive and process jobs until valid
code is programmed into the
internal print server.

Download valid code to the printer internal
print server.

NOTE:

You can download network code while

this message is displayed.

Invalid Standard
Network Code

Load Manual

A request for a manual feed job has
been sent to the printer. The
printer is ready for insertion of a
single sheet into the manual feed
slot.

Load a sheet of the paper specified in
the second line of the display in the
manual feed tray or multipurpose
feeder.
Press Select or Go to ignore the
manual feed request and print on paper
already installed in one of the input
sources. If the printer finds a tray that
has paper of the correct type and size,
it feeds paper from that tray. If the
printer cannot find a tray with the
correct paper type and size, it prints on
whatever paper is installed in the
default input source.
Press Menu to open the Job Menu and
cancel the current job.