Dell M5200 Medium Workgroup Mono Laser Printer - Manual (Page 64)

from the next linked tray - tray 3.
If you load the same size print media in each tray, make sure the print media is all the same type in order to
link the trays.
Once the trays you selected are loaded with the same size and type of print media, select the same Paper
Type setting in the Paper Menu for these sources.
To disable tray linking, set the Paper Type to a unique value in each one of the trays. If all the trays do not
have the same type of print media when they are linked, you could mistakenly print a job on the wrong
paper type.
Using the duplex function
Duplex printing (or two-sided printing) lets you print on both sides of a sheet of paper. For sizes that are
acceptable for duplex printing, see
Print media sizes and support .
Select Duplex from your printer driver to print individual duplex jobs.
Duplex printing on letterhead
When duplex printing on letterhead from the multipurpose feeder, load it with the logo face down and
entering the printer last.
When duplex printing on letterhead from the trays, load it with the logo face up and entering the printer
first.
Using Duplex Bind
When you select duplex bind printing in the printer driver, you must select either long edge or short edge
binding, which are the values for this setting. The purpose of Duplex Bind is to define the way duplexed
pages are bound, and how the printing on the back of the sheet (even-numbered pages) is oriented in
relation to the printing on the front (odd-numbered pages).
The two values for Duplex Bind are: