Dell M5200 Medium Workgroup Mono Laser Printer - Manual (Page 19)

a properly grounded outlet.
1.
Turn on the computer and the printer. 2.
Print and check the menu settings page
The Menu Settings page lists all the options you purchased or installed. If a feature or an option is not listed,
you need to check your installation.
Press Menu until you see Utilities Menu, and then press Select. 1.
Press Menu until you see Print Menus, and then press Select to print the page. The message
Printing Menus
appears on the display.
2.
Verify that the options you installed are correctly listed under "Installed Features." 3.
If an option you installed is not listed, turn the printer off, unplug the power cord, and reinstall the
option. 4.
Verify the amount of memory installed is correctly listed under "Printer Information." 5.
Verify that any optional trays you installed are configured for the sizes and types of print media you
loaded. 6.
When you add or remove an option, remember to update the printer's configuration through your printer
driver. The following instructions may vary, depending on your operating system.
Click Start Settings Printers. 1.
Right-click the Dell Laser Printer M5200 icon and select Properties. 2.
Select the Device tab, and then select the option. 3.
4.