Dell OptiPlex GX60 User Manual
Page 127
Advertising
10.
Update your configuration information by setting the appropriate Drive option (0 or 1) under Drives: Secondary to Auto. See "
Drive Configuration
" for
more information.
After you open and close the cover, the chassis intrusion detector, if enabled, causes the following message to appear on the screen at the next
computer start-up:
ALERT! Cover was previously removed.
11.
Reset the chassis intrusion detector
by changing Chassis Intrusion to Enabled or Enabled-Silent.
12.
Verify that your computer works correctly by running the
Dell Diagnostics
.
Back to Contents Page
NOTE:
If a setup password has been assigned by someone else, contact your network administrator for information on resetting the chassis
intrusion detector.
Advertising