About your computer, Front view – Dell OptiPlex GX60 User Manual

Page 137

Advertising
background image

Back to Contents Page

 

About Your Computer

Dell™ OptiPlex™ GX60 Systems User's Guide

  

Front View

  

Back View

  

Inside Your Computer

 

Front View

 

 

 

1  CD-drive eject

button

 

Press this button to eject your CD from the CD drive.

2  hard-drive activity

light

 

The hard drive light is on when the computer reads data from or writes data to the hard drive. The light might also be on when a

device such as your CD player is operating.

3  front panel door

 

Open the door to use the front panel connectors.

4  USB 2.0 connectors

(2)

 

Use the front USB connectors for devices that you connect occasionally, such as joysticks or cameras, or for bootable USB devices

(see "

Booting to a USB Device

" for more information).

 

It is recommended that you use the back USB connectors for devices that typically remain connected, such as printers and

keyboards.

5  headphone

connector

 

Use the headphone connector to attach headphones and most kinds of speakers.

6  power button

 

Press to turn on the computer.

 

 

NOTE:

If your operating system has ACPI enabled, when you press the power button the computer will perform an operating

system shutdown.

NOTICE:

To avoid losing data, do not turn off the computer by pressing the power button for 6 seconds or longer. Instead,

perform an operating system shutdown.

7  power light

 

The power light illuminates and blinks or remains solid to indicate different states:

l

 

No light — The computer is in the off state (S4, S5, or mechanical OFF).

l

 

Steady green — The computer is in a normal operating state.

l

 

Blinking green — The computer is in a power-saving state (S1 or S3).

 

To exit from a power-saving state, press the power button or click or move the mouse.

 

See "

Diagnostic Lights

" for a description of light codes that can help you troubleshoot problems with your computer.

8  floppy-drive activity

light

 

The floppy drive light is on when the computer reads data from or writes data to the floppy drive. Wait until this light turns off

before you remove the floppy disk from the drive.

9  floppy-drive eject

button

 

Press to eject a floppy disk from the floppy drive.

Advertising