Processor, Removing the processor – Dell OptiPlex GX60 User Manual
Page 160
Back to Contents Page
Processor
Dell™ OptiPlex™ GX60 Systems User's Guide
Removing the Processor
1.
Follow the procedures in "
Before You Begin
."
2.
Disconnect the cooling fan power cable from the
FAN connector
on the system board.
3.
Disconnect the power cable from the
12VPOWER connector
on the system board.
4.
Lift up the airflow shroud.
5.
Remove the heat sink:
a.
Press and lower the green lever on the retention mechanism until it is parallel to the system board.
b.
Gently rock the heat sink and then slightly twist it as you lift it from the processor.
CAUTION:
Before you begin any of the procedures in this section, follow the
safety instructions.
CAUTION:
To guard against electrical shock, always unplug your computer from the electrical outlet before opening the cover.
CAUTION:
The heat sink can get very hot during normal operation. Be sure that the heat sink has had sufficient time to cool before you touch it.