Dell OptiPlex GX60 - Manual (Page 34)

3. Remove the metal control-panel shield.
4. Remove the screw that holds the control panel to the computer, and remove the control panel.
Small Desktop Computer
1. Follow the procedures in " Before You Begin ."
2. Remove the front I/O panel .
3. Using an 8-inch #2 Phillips screwdriver, remove the screw that secures the control panel to the computer, and lift the panel away from the computer.
Small Mini-Tower Computer
1. Follow the procedures in " Before You Begin ."
2. To remove the top and bottom panels of the computer, remove any installed CD drives and release all the tabs on each panel.
3. To prepare the computer cover for removal, release the three computer cover tabs (one tab is located by the CD drive and two tabs are located by the
I/O panel).
1 computer cover tab (remove
the CD drive to access this tab)
4 bottom panel
2 top-panel tabs 5 computer cover screw
3 top panel 6 computer cover tabs (2)