Dell PowerVault MD1120 - Manual (Page 21)

Operating Your Storage Enclosure
21
Operating Your Storage Enclosure
This section provides procedures for connecting your storage enclosure to a
host system for either unified or split mode.
Before You Begin
Before connecting your storage enclosure, ensure that the following are
available:
• The components that came with your storage enclosure, including:
–
Power cord
– SAS interconnect cables
– Documentation CD
– Rail kit
• Any relevant documentation, including:
–
Getting Started Guide
– Rack Installation Guide or Rack Installation Instructions
– Safety, regulatory, and warranty information
– Installation and Server Management CD (version 5.4 or later)
– Server Administrator documentation
– Readme files
Cabling Your Enclosure for Unified or Split Mode
How you cable your enclosure to your host controller depends on the
configuration you choose: unified or split mode.
• A unified configuration is one in which your enclosure is connected to one
host (for example, a server with a controller card). In unified mode, your
enclosure can be one of up to three enclosures daisy-chained to a single
port on the controller card in your host server. See Figure 2-1 and
Figure 2-4 for a cabling diagram of a unified mode configuration.