Dell PowerVault MD1120 - Manual (Page 38)

38
Installing Enclosure Components
4 Remove the physical disks in slots 0 through 7 from the enclosure (see
"Removing and Installing Physical Disks" on page 28).
NOTE:
To avoid confusion when re-installing the physical disks, mark each
disk with its slot position as you remove it.
Figure 3-7. Removing and Replacing the Control Panel
5 Pull the release plunger toward the inside of the empty enclosure and slide
the control panel straight out from its connector on the backplane (see
Figure 3-7).
1 control panel 2 release plunger
1 2