Dell Dimension 9200c - Manual (Page 17)

Specifications: Dell Dimension 9200C Service Manual
file:///T|/htdocs/systems/dim9200C/en/SM_EN/specs.htm[10/31/2012 8:07:23 AM]
NOTE: The 10-pin header connector used
for the optional Media Card Reader is
populated with only nine pins for keying
purposes.
Audio six back panel connectors for line-in, line-
out/headphone, rear surround sound,
microphone, side surround sound, and
center/Low Frequency Effects (LFE)
channel
back panel S/PDIF connector
front panel miniature headphone
connector for line-out
front panel microphone connector
Network adapter RJ45 connector
Modem RJ11 (MDC 1.5) connector and internally
accessible 3-pin header that connects the
modem to RJ11
Temperature Sensor one 2-pin connector
System board connectors:
Serial ATA two 7-pin connectors
Fan two 5-pin connectors (one for the CPU fan
and one for the optional hard drive fan
connector.)
PCI Express x1 36-pin connector
PCI Express x16 164-pin connector
USB 10-pin header for optional Media Card
Reader (3.5-inch bay device)
MDC one 12-pin connector
Floppy connector one 26-pin connector
Front panel one 40-pin header
Power one 2 x 12 connector
Processor power one 2 x 2 connector
IEEE 1394 one 2 x 5 header — always connected by
cable to the front panel; supports front
panel IEEE 1394 port
Controls and Lights
Power control
push button
Power light green light — Blinking green in sleep
state; solid green for power-on state.
amber light — Blinking amber indicates a
problem with an installed device; solid
amber indicates an internal power
problem (see "Power Problems" in your
computer Owner's Manual).
Hard drive access light green
Link integrity light (on integrated network
adapter)
green light — A good connection exists
between a 10-Mbps network and the
computer.