Dell Dimension 9200c - Manual (Page 48)

Removing and Installing Parts: Dell Dimension 9200C Service Manual
file:///T|/htdocs/systems/dim9200C/en/SM_EN/parts.htm[10/31/2012 8:07:53 AM]
1 drive release latch 2 floppy drive
5. Disconnect the floppy drive interface cable from the system board (see System Board Components ).
NOTE: The interface cable is held in place by the metal drive bracket and does not need to be removed from the
drive.
1 cable release tab 2 interface cable edge connector 3 interface cable
Installing a Floppy Drive
NOTE: If the replacement or new floppy drive does not have the shoulder screws, use the screws in the drive panel
insert.