Dell Dimension 9200c - Manual (Page 39)

Removing and Installing Parts: Dell Dimension 9200C Service Manual
file:///T|/htdocs/systems/dim9200C/en/SM_EN/parts.htm[10/31/2012 8:07:53 AM]
1 PCI Express x16 card 2 PCI Express x1 card 3 PCI Express x1 card slot
4 PCI Express x16 card slot
If you are installing or replacing a PCI Express card, follow the procedures in the next section. If you are removing but not
replacing a card, see Removing a PCI Express Card .
If you are replacing a card, remove the current driver for the card from the operating system.
Installing a PCI Express Card
1. Follow the procedures in Before You Begin .
2. Gently push the release tab on the card retention door from the inside to pivot the door open. Because the door is
attached, it will remain in the open position.
1 retention arm tab 2 PCI Express card 3 edge connector
4 card connector 5 securing tab 6 securing slot