Dell Dimension 9200c - Manual (Page 44)

Removing and Installing Parts: Dell Dimension 9200C Service Manual
file:///T|/htdocs/systems/dim9200C/en/SM_EN/parts.htm[10/31/2012 8:07:53 AM]
1 tabs (2) 2 drive 3 drive screw holes
4 drive bracket
5. Connect the power cable and hard drive or SATA cable to the drive.
1 power cable 2 hard drive plastic latch 3 hard drive cable or serial ATA data cable
4 open bay
6. Check all connectors to be certain that they are properly cabled and firmly seated.
7. Gently slide the drive into the open bay until the hard drive plastic latch attaches to the hard drive holder on the
chassis.
1 tabs (2) 2 hard drive 3 hard drive holder on the chassis
4 hard drive plastic latch
8. Align the drive screw holes with the screws projecting upwards on the heat sink holder.