Dell Dimension 9200c - Manual (Page 52)

Removing and Installing Parts: Dell Dimension 9200C Service Manual
file:///T|/htdocs/systems/dim9200C/en/SM_EN/parts.htm[10/31/2012 8:07:53 AM]
4. Connect the interface cable to the back of the Media Card Reader and to the Media Card Reader connector on the
system board (see System Board Components ).
1 interface cable
5. Replace the hard drive (see Installing a Hard Drive ).
6. Replace the CD/DVD drive (see Installing a CD/DVD Drive ).
7. Replace the computer cover (see Replacing the Computer Cover ).
NOTICE: To connect a network cable, first plug the cable in to the network port or device, and then plug it in to the
computer.
8. Connect your computer and devices to electrical outlets, and then turn them on.
See the documentation that came with the Media Card Reader for instructions on installing any software required for its