Figure 3-15, D into place. see figure 3-15 – Dell PowerVault NX300 User Manual
Page 106
Advertising
106
Installing System Components
When the front of the card is fully seated, the plastic standoffs snap
over the edge of the card.
Figure 3-15.
Installing or Removing an iDRAC6 Enterprise Card (Optional)
6 Close the system. See "Closing the System" on page 83.
7 Reconnect the system and peripherals to their power sources, and turn
them on.
1
iDRAC6 Enterprise card
2
VFlash media slot
3
VFlash SD card
4
retention standoff posts (2)
5
retention standoff tabs (2)
6
iDRAC6 Enterprise card connector
3
2
1
4
5
6
book.book Page 106 Thursday, August 13, 2009 7:27 AM
Advertising