Dell POWEREDGE M1000E - Manual (Page 367)

Fabric OS Administrator’s Guide 327
53-1001763-02
McDATA-unaware features
14
DHCP Yes
Environmental monitor Yes
Error event management Yes
Fabric Device
Management Interface
(FDMI) Yes
Fabric Watch (FW) Yes
Fibre Channel over
Ethernet (FCoE) No McDATA Fabric mode and McDATA Open Fabric
mode are not supported on the Brocade 8000.
FICON (includes CUP) No Supported on the Brocade 4900, 5000, 5100,
5300, and the VA-40FC switches, and the
Brocade 48000 and the Brocade DCX
Backbone.
Note: All switches must be running FOS v6.1.0 or
later to support this feature.
High Availability (HA) Yes Coordinated Hot Code Load in Fabric OS v6.1.0.
Interoperability
•
Fabric OS Native mode: No
•
McDATA Open mode: Yes
•
McDATA Fabric mode: Yes
IP over FC Yes Works on a local Fabric OS switch. Broadcast
frames are sent to F_Ports only; there is no
forwarding of broadcast frames to E_Ports.
License Yes
Log tracking Yes
Long-distance fabrics Yes The configure command displays the number of
buffer credits.
Management server Yes FICON Management Server supported in
McDATA Fabric mode.
Manufacturing
diagnostics Yes
N_Port ID Virtualization Yes The tested limits for NPIV are 24 NPIV channels
multiplied by 12 virtual port logins.
Name server Yes Support Domain offset, McDATA specific
SWRSCN, FCFG commands (GE_PT, GSNN_NN,
GSPN_ID, and GA_NXT).
Network Time Protocol
(NTP) No
Open E_Port Yes Autonegotiates the R_RDY mode by default.
Uses portCfgIsMode to static configure the port.
Port mirroring Yes Fabric OS v6.2.0 and later supports 8 Gbps port
mirroring.
SNMP Yes
TABLE 70 Complete feature compatibility matrix (Continued)
Feature Support Notes