Dell POWEREDGE M1000E - Manual (Page 551)

Fabric OS Administrator’s Guide 511
53-1001763-02
Examples of supported configurations
B
FIGURE 81 Management Station on a different subnet
1. Configure the IP address for each of the 7500s (L1 and R1):
a. On the 7500 L1, create an IP address on the GE interface:
switch:admin> portcfg ipif ge0 create 192.168.1.10 255.255.255.0 1500
b. On the 7500 R1, create an IP address on the GE interface:
switch:admin> portcfg ipif ge0 create 192.168.2.20 255.255.255.0 1500
2. Configure the management addresses for the 7500 L1.
a. Configure the internal addresses for the inbd devices for CP and GE port (GE port 0 for this
example).
switch:admin> portcfg inbandmgmt ge0 ipaddrset cp 192.168.255.1 255.255.255.0
switch:admin> portcfg inbandmgmt ge0 ipaddrset ge 192.168.255.2 255.255.255.0
b. Add the route on the switch going to the Management Station.
switch:admin> portcfg inbandmgmt ge0 routeadd 192.168.3.0 255.255.255.0
192.168.1.250
3. Configure the management addresses for the 7500 R1.
a. Configure the internal addresses for the inbd devices for CP and GE port (GE port 0 for this
example).
switch:admin> portcfg inbandmgmt ge0 ipaddrset cp 192.168.255.1 255.255.255.0
switch:admin> portcfg inbandmgmt ge0 ipaddrset ge 192.168.255.2 255.255.255.0
b. Add the route on the switch going to the Management Station.