Closing the computer cover, Close the computer cover – Dell Precision 370 User Manual
Page 136
Closing the Computer Cover
Dell Precision™ Workstation 370 User's Guide
CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions located in
the Product Information Guide.
1. Ensure that all cables are connected, and fold cables out of the way.
Gently pull the power cables toward you so that they do not get caught underneath the drives.
2. Ensure that no tools or extra parts are left inside the computer.
3. Close the cover:
a. Pivot the cover down.
b. Press down on the right side of the cover until it closes.
c. Press down on the left side of the cover until it closes.
d. Ensure that both sides of the cover are locked. If not, repeat all of
NOTICE:
To connect a network cable, first plug the cable into the network wall jack and then plug it into the computer.
4. Connect your computer and devices to electrical outlets, and turn them on.