Dell Precision 370 - Manual (Page 25)

Voltage: Generic Critical Voltage Problem/Generic
Critical Voltage Problem Cleared The voltage from integrated voltage regulators is out of limits
or the voltage problem has been resolved.
Power Supply: Critical Power Supply Problem/
Critical Power Supply Problem Cleared The computer power supply voltage is out of limits or the
computer power supply voltage problem has been resolved.
Cooling Device: Generic Critical Fan
Failure/Generic Critical Fan Failure Cleared The fan speed (rpm) is out of limits or the fan speed (rpm)
problem has been resolved.
Connectivity: Ethernet Connectivity Enabled/
Ethernet Connectivity Disabled The ethernet connectivity is enabled or the ethernet
connectivity is disabled.
For more information about Dell's ASF implementation, see the ASF User's Guide and the ASF Administrator's Guide, which
are available on the Dell Support website at support.dell.com.
Dell OpenManage IT Assistant
IT Assistant configures, manages, and monitors computers and other devices on a corporate network. IT Assistant manages
assets, configurations, events (alerts), and security for computers equipped with industry-standard management software. It
supports instrumentation that conforms to SNMP, DMI, and CIM industry standards.
Dell OpenManage Client instrumentation, which is based on DMI and CIM, is available for your computer. For information on
IT Assistant, see the Dell OpenManage IT Assistant User's Guide available on the Dell Support website at support.dell.com.
Dell OpenManage Client Instrumentation
Dell OpenManage Client Instrumentation is software that enables remote management programs such as IT Assistant to do
the following:
Access information about your computer, such as how many processors it has and what operating system it is running
Monitor the status of your computer, such as listening for thermal alerts from temperature probes or hard-drive failure
alerts from storage devices
Change the state of your computer, such as updating its BIOS or shutting it down remotely
A managed system is one that has Dell OpenManage Client Instrumentation set up on a network that uses IT Assistant. For
information about Dell OpenManage Client Instrumentation, see the Dell OpenManage Client Instrumentation User's Guide
available on the Dell Support website at support.dell.com.
Security
Chassis Intrusion Detection
NOTE: When the admin password is enabled, you must know the admin password before you can reset the Chassis
Intrusion setting.
This feature detects that the chassis was opened and alerts the user. To change the Chassis Intrusion setting:
1. Enter system setup.
2. Press the down-arrow keys to move to the System Security option.
3. Press <Enter> to access the menu.