Dell Precision 370 - Manual (Page 62)

1 power cable
2 floppy-drive cable
3 floppy-drive connector (DSKT)
5. If you are installing a new floppy drive rather than replacing a drive, remove the front-panel inserts .
6. Check all cable connections, and fold cables out of the way to provide airflow for the fan and cooling vents.
7. Close the computer cover.
NOTICE: To connect a network cable, first plug the cable in to the network wall jack and then plug it in to the
computer.
8. Connect your computer and devices to their electrical outlets, and turn them on.
See the documentation that came with the drive for instructions on installing any software required for drive operation.
9. Enter system setup and select the appropriate Diskette Drive option.
10. Verify that your computer works correctly by running the Dell Diagnostics .
CD/DVD Drive
CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the
Product Information Guide.
CAUTION: To guard against electrical shock, always unplug your computer from the electrical outlet before
opening the cover.