Dell Precision 370 User Manual
Page 76
1 top edge of card fan bracket
4 card fan connector on system board
2 card fan cable
5 hooks on inside of computer cover
3 cabling slot
6 card fan bracket
3. Slide the card fan bracket onto the hooks on the inside of the computer cover.
4. Press the top edge of the card fan bracket toward the computer cover until it clicks.
5. Route the card fan cable through the cabling slots.
1 card fan bracket
4 card fan cable
2 top edge of card fan bracket
5 card fan connector on system boards
3 cabling slot
6. Plug the card fan cable into the card fan connector labeled "PCI FAN" on the system board. For more information on
system board , see "
7. If you removed drive rails in
, you may attach them to the side of the card fan bracket for convenient storage.
8.
.
NOTICE:
To connect a network cable, first plug the cable into the network wall jack and then plug it into the computer.