Removing a hard drive – Dell Precision 370 User Manual

Page 142

Advertising
background image

NOTICE:

To avoid damage to the drive, do not set it on a hard surface. Instead, set the drive on a surface, such as a

foam pad, that will sufficiently cushion it.

Removing a Hard Drive

1. If you are replacing a hard drive that contains data you want to keep, back up your files before you begin this

procedure.

2. Follow the instructions in "

Before You Begin

."

3. Disconnect the power and hard-drive cables from the drive.

1

power cable

2

serial ATA hard-drive cable

4. Press in on the tabs on each side of the drive and slide the drive up and out.

Serial ATA Drive

Advertising
See also other documents in the category Dell Computers: