Dell Precision 370 - Manual (Page 24)

Back to Contents Page
Advanced Features
Dell Precision™ Workstation 370 User's Guide
LegacySelect Technology Control
Manageability
Security
Password Protection
System Setup
Clearing Forgotten Passwords
Clearing CMOS Settings
Power Management
Hyper-Threading
IEEE 1394
U320 SCSI Controller
About RAID Configurations
LegacySelect Technology Control
LegacySelect technology control offers legacy-full, legacy-reduced, or legacy-free solutions based on common platforms,
hard-drive images, and help desk procedures. Control is provided to the administrator through system setup, Dell
OpenManage™ IT Assistant, or Dell™ custom factory integration.
LegacySelect allows administrators to electronically activate or deactivate connectors and media devices that include serial
and USB connectors, a parallel connector, a floppy drive, PCI slots, and a PS/2 mouse. Connectors and media devices that are
deactivated make resources available. You must restart the computer to effect the changes.
Manageability
Alert Standard Format
ASF is a DMTF management standard that specifies "pre-operating system" or "operating system-absent" alerting techniques.
The standard is designed to generate an alert on potential security and fault conditions when the operating system is in a
sleep state or the system is powered down. ASF is designed to supersede previous operating system-absent alerting
technologies.
Your computer supports the following ASF alerts:
Alert Description
BIOS: Corrupt BIOS/Corrupt BIOS Cleared The BIOS has been corrupted or the BIOS corruption has been
resolved.
Boot: Failure to Boot to BIOS The BIOS did not complete loading upon initiation.
Password: System Password Violation The system password is invalid (alert occurs after three failed
attempts).
CPU: CPU DOA Alert/CPU DOA Alert Cleared The microprocessor is not functioning.
Heartbeats: Entity Presence Periodic heartbeats have been transmitted to verify system
presence.
Temperature: Generic Critical Temperature
Problem/Generic Critical Temperature Problem
Cleared The computer temperature is out of limits or the computer
temperature problem has been resolved.