Dell Precision 370 User Manual
Page 71
Advertising
1 top of retention mechanism
8
edge connector
2 PCI Express x16 card
9
card connector
3 securing slot
10
filler bracket
4
securing tab
11
retention arm
5
edge connector
12
lever
6
card connector
13
tab
7
PCI Express x1 card
3. If you are installing a new card, remove the filler bracket to create a card-slot opening. Then continue with
4. If you are replacing a card that is already installed in the computer, remove the card.
If necessary, disconnect any cables connected to the card. If your card includes a retention mechanism, remove the top
of the retention mechanism by pressing the tab and pulling up on the top. Gently pull the securing tab, grasp the card
Advertising