Dell Precision 370 - Manual (Page 146)

Floppy Drive
CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the
Product Information Guide.
Removing a Floppy Drive
1. Follow the procedures in " Before You Begin ."
2. Disconnect the power and floppy-drive cables from the back of the floppy drive.
3. Disconnect the other end of the floppy-drive cable from the system board (labeled DSKT).
1 power cable
2 floppy-drive cable
3 floppy-drive connector (DSKT)
4. Press inward on the two tabs on the sides of the drive, slide the drive upward, and remove it from the floppy-drive
bay.