Dell PowerEdge R210 II - Manual (Page 30)

30 Using the System Setup Program and Boot Manager
SATA Settings Screen
Processor Family-Model-
Stepping
Displays the processor family and model.
Level 2 Cache Displays the level 2 cache size.
Level 3 Cache Displays the level 3 cache size.
Number of Cores Displays the number of cores of the processor.
Logical Processor
(Enabled default)
On processors that support Simultaneous Multi-
Threading (SMT) technology, each processor core
supports up to two logical processors. If this field is set to
Enabled, the BIOS reports both logical processors. If set
to Disabled, only one logical processor is monitored by
the BIOS.
Virtualization Technology
(Disabled default)
Enabled permits virtualization software to use the
virtualization technology incorporated in the processor.
NOTE: Disable this feature if your system will not be
running virtualization software.
Execute Disable
(Enabled default)
Enables or disables Execute Disable Memory Protection
Technology.
Number of Cores per
Processor
(All default)
If set to All, the maximum number of cores in each
processor is enabled.
Turbo Mode
(Enabled default)
If Turbo Boost technology is supported by the processor,
Turbo Mode is enabled or disabled.
C States
(Enabled default)
When set to Enabled, the processor can operate in all
available power states.
Option Description
Embedded SATA
(AHCI default)
Allows the embedded SATA to be set to Off, ATA, AHCI,
or RAID modes.
Port A
(Auto default)
Auto enables BIOS support for the device attached to
SATA port A. Off disables BIOS support for the device.
Port B
(Off default)
Auto enables BIOS support for the device attached to
SATA port B. Off disables BIOS support for the device.
Option Description
book.book Page 30 Friday, March 7, 2014 1:35 PM