Dell PowerEdge R210 II - Manual (Page 49)

Installing System Components 49
Front Bezel (Optional)
Removing the Front Bezel
1 Using the system key, unlock the front bezel (if locked).
2 Lift up the release latch next to the keylock.
3 Rotate the left end of the bezel away from the front panel.
4 Unhook the right end of the bezel and pull the bezel away from
the system.
Figure 5-2. Removing and Installing the Front Bezel
Installing the Front Bezel
1 Hook the right end of the bezel onto the chassis.
2 Fit the free end of the bezel onto the system.
3 Secure the bezel with the keylock. See Figure 5-2.
1 release latch 2 keylock
3 hinge tab 4 front bezel
3
2
1
4
book.book Page 49 Friday, March 7, 2014 1:35 PM