Dell PowerEdge R210 II - Manual (Page 39)

Using the System Setup Program and Boot Manager 39
Boot Settings Screen
Boot Mode: BIOS
Boot Mode: UEFI
System Utilities Screen
Option Description
Set Boot Order Sets the order of the boot option list.
Set Legacy Floppy
Drive Order
Sets the floppy drive boot priority.
Set Legacy Hard Disk
Drive Order
Sets the hard-drive boot priority.
Set Legacy CD-ROM
Drive Order
Sets the CD-ROM boot priority.
Set Legacy NET Drive Order Sets the network device boot priority.
Set Legacy BEV Drive Order Sets the Bootstrap Entry Vector (BEV) boot priority.
NOTE: Only the first device under Legacy Drive is displayed in the Set Boot Order option.
Option Description
Add Boot Option Adds a new boot option.
Delete Boot Option Deletes an existing boot option.
Enable/Disable Boot Option Disables and enables a boot option in the boot option list.
Boot From File
Sets a one-time boot option not included in the boot
option list.
Set Boot Order Sets the order of the boot option list.
Option Description
System Setup Accesses the System Setup program without rebooting.
System Services Restarts the system and accesses the Dell USC, which
allows you to run utilities such as system diagnostics.
Reset System Restarts the system.
book.book Page 39 Friday, March 7, 2014 1:35 PM