Dell PowerEdge R210 II - Manual (Page 95)

Installing System Components 95
Figure 5-21. Removing and Installing the System Board
Installing the System Board
CAUTION: Many repairs may only be done by a certified service technician. You
should only perform troubleshooting and simple repairs as authorized in your
product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized by Dell is not covered
by your warranty. Read and follow the safety instructions that came with the
product.
1 Unpack the new system board.
2 Remove the labels from the processor shield and affix them to the system
identification panel on the front of the system. See Figure 3-1.
3 Holding the system board by its edges, lower it into the chassis.
1 screws (10) 2 system board assembly
1
2
book.book Page 95 Friday, March 7, 2014 1:35 PM