See figure 5-6 – Dell PowerEdge R210 II User Manual
Page 57
Installing System Components
57
Figure 5-6. Removing and Installing a 3.5-Inch Hard Drive
NOTE:
If you are not replacing the hard drive, remove the drive from the hard-drive
carrier (see "Removing a 3.5-Inch Hard Drive From a Hard-Drive Carrier" on page 59)
and replace the empty hard-drive carrier back into the drive bay.
7 If you have removed or replaced HDD1, replace the optical drive (if
present) mounted above the hard-drive carrier. See "Installing an Optical
8 Close the system. See "Closing the System" on page 51.
9 Reconnect the system to its electrical outlet and turn the system on,
including any attached peripherals.
1
hard-drive carrier
2
release pin
3
hard drive
4
data cable
5
power cable
6
chassis tabs (4)
1
2
3
5
4
6
book.book Page 57 Friday, March 7, 2014 1:35 PM