Installing a cooling fan, Figure 5-13, See figure 5-13 – Dell PowerEdge R210 II User Manual
Page 75
Installing System Components
75
Figure 5-13. Removing and Installing a Fan
Installing a Cooling Fan
CAUTION:
Many repairs may only be done by a certified service technician. You
should only perform troubleshooting and simple repairs as authorized in your
product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized by Dell is not covered
by your warranty. Read and follow the safety instructions that came with the
product.
1 Ensure that the fan is oriented correctly.
Orient the fan module so that the side with the power cable faces the back of
the system.
2 Lower the fan into the fan assembly until the fan is fully seated.
See Figure 5-13.
3 Connect the fan’s power cable to the power connector on the system board.
1
fan
2
power cable
1
2
book.book Page 75 Friday, March 7, 2014 1:35 PM