Dell Compellent Series 30 User Manual
Page 169
Advertising
161
Viewing iSCSI Cards
•
Speed: of IO transfer
•
IP Address, Subnet Mask, and Gateway IP Address
•
iSCSI Name and Target Alias
•
Fault Domain, Network, and Usage as entered via the Configure Local Ports
wizard.
•
Port purpose
•
Preferred Controller: Appears if a system is rebooted.
•
Maximum Transmission Unit
•
VLAN Tagging
•
Initiator Count: Number of front end devices
•
Target Count: Number of disk drives
•
Both Count: Total of front-end devices and back-end disk drives
•
Map Count: Number of volumes mapped to this system
Note
Virtual Ports do not display hardware because the port is not reliant on a card.
Advertising