Dell Compellent Series 30 - Manual (Page 43)

35
Server Clusters
Figure 24. Create Server Cluster Window
4 Add another server by clicking Add Existing Server again. The Create Server Cluster
window reappears with the servers listed in the Select Servers frame. The window
displays the operating systems of the selected servers.
Note All servers in the server cluster must have the same operating system. If a server is
incorrectly selected to be in the cluster, use the Remove Selected Server button to
remove the server from the list before creating the server cluster.
5 Once the Create Server Cluster window displays all the servers for this server cluster,
click Continue. A window allowing you to name the server cluster appears.
6 Name the server cluster or accept the default. Add notes if necessary.
7 Click Continue. If volumes were mapped to individual server nodes, the system
displays a list of mapped volumes and asks you to select volumes to map to the server
cluster. By default, the system selects all volumes mapped to the server nodes, except
boot volumes; by default, boot volumes are not selected to be mapped to the server
cluster.