Advanced mapping options, Advanced mapping options on – Dell Compellent Series 30 User Manual
Page 82
74
Storage Center 5.5 System Manager User Guide
Volumes
Advanced Mapping Options
To view advanced options, you must map volumes individually. If you map multiple
volumes, the advanced window does not appear. Make sure that Allow Advanced
Mapping is enabled in your User Volume Mapping Defaults. Refer to
Note
The advanced options available differ depending upon the configuration of the server
and the configuration of the Storage Center.
In the Map Volume to Server Confirmation window, click Advanced. The Advanced Map
Volume to Server window appears.
Figure 56. Advance Mapping Options
The options available on the Advanced mapping screen will differ depending upon the
configuration of your system. For the volume you are mapping, choose from the following
options:
Selecting a Logical Unit Number
•
If the volume you are mapping is a boot volume, select Map Volume using LUN 0. LUN
0 is reserved for boot volumes. If the volume you are mapping is not a boot volume,
make sure this option is cleared. If a volume has already been mapped to the selected
server using LUN 0, this option does not appear.
•
To map the selected volume to the server using a specific LUN, select and enter a LUN.