Dell Compellent Series 30 - Manual (Page 420)

412 Storage Center 5.5 System Manager User Guide
Configuring a UPS
The Access window appears.
Figure 328. Enter Liebert SNMP
5 Click Edit.
6 In the Network Name column, enter the following:
• For a single-controller Storage Center system, enter the controller IP address on the
first unused line.
• For a dual-controller Storage Center system, enter the IP address of each controller
on the first two unused lines. (Do not enter the Management IP of the Storage
Center but the true ETH0 IP of each Controller. For IP addresses, refer to
Viewing
Controller Properties on page 144 .)
7 Select Read Access.
8 In the Community name enter Public.
9 Click Save .
10 From the tree on the left side, select Management Protocol > SNMP > Traps.